Linxun
汉化组
  
UID 178107
精华
27
总积分 19647
帖子 3285
交易分 0
金币 0
阅读权限 50
注册 2004-2-12
现用手机R373_G_0E.30.49R
状态 离线
|
[广告]: 北京全球通,动感地带手机靓号出售
New version of program MotoLangEditor v2.0.0 from (13.03.07)
[ the addition ]
* Langs's support from 3G telephones and Langs from the new models with TTF (it is possible to substitute TTF with what without the limitation by the size).
* a change in the lines of language. Zagruzka/sokhraneniye of the lines of iz/v file. The size of file is identical to size it is file in programs Random's Language Editor and SHXCoDEC. It is possible to add new lines.
* the function of the automatic correction of Russian letters in mp3 TEG (replacement of the images of the corresponding symbols in the Russians).
* reading the table of the auto- selection of language. This table on which by telephone is selected language, depending on ID operator, if in tuning of telephone the auto- selection of language stands.
* retention and load is type v/iz of fayl(a). With what, if is opened Lang with TTF, then they will be preserved and load there will be TTF files, and if usual, then files with its own structure (*..mff).
[ changes ]
* in connection with the expansion of functional, program is renamed in MotoLangEditor.
* now program knows all 47 languages, which are let out Motorola, in the sense you now must not see inscription Unkown in the list of languages.
* removal iTAP now physical, but is not simple address.
* naturally changed the interface of program.
[ corrections ]
* is completely rewritten the algorithm of discovery and retaining Lang (it is type, lines, etc.). Now everything must work stably.
* is corrected serious bag with the retention of Lang. With very large type, possibly, it was that the collections at the end were filled up with "rubbish".
* did not change the height of table rows with the symbols with an increase in altitude of collection.
* in addition is corrected isolation, there were again the cases, when it was not removed. Now like there must not be Gluck's this.
* not the correct work of buttons zoom in the main menu (on the panel everything it was normally). Z.Y. in the first post all in detail painted.
*************************************************************
MotoLangEditor
Program is broken into 3 supplementary sheets: work with type; by languages and by the table of the auto- selection of language.
Editing of type
1. With the discovery of Lang from the usual models (not 3G or new in the type L7e), before you below will appear the table with all existing in Lang collections it is type. Each collection is used for the specific purposes in the telephone. In the table is a description of each collection, its ordinal number in HEX and the height of the collection (it it is identical for entire collection). To the right will appear table with all symbols, which there is in the selected collection. Each symbol has the specific width, but it cannot be more than 15 pikseley (limitation in Lang).
After selecting symbol, you will see its image, it is possible to edit by hand him. For this in menu Symbol there is a set of different functions for this, and to the left there is a panel with the tools for the drawing. In detail to paint each function not I will be, in them it is possible easily to be dismantled very. I will simply note that to select is possible several symbols, then the large part of the functions in menu Symbol (displacement of image, size change) they will act for the selected group. This is convenient, if it is necessary, for example, to move all symbols by the pair of the pikseley of vverkh/vniz.
There is the simpler method of the editing of type - this is its replacement to any type, established in Windows. It is necessary for this:
* in menu Font > Select Windows font it is necessary to select type and its parameters (height, etc.). The communication about the height of selected type will appear with the selection. Certainly, it is necessary, but it is not compulsory so that its height would be not more than the height of the replaceable collection. If the height of selected type is more, then it is necessary to select the smaller size of type or in menu Symbol > Set height sets to select the high altitude (to make this I do not recommend, since frequently this it will cause Glucks, for example empty lines in the lists). The height so can be decreased.
* in the table to to the right isolate the symbols, which it is necessary to replace (better everything). All symbols can be isolated, after selecting the first, and then, retaining key Shift, to harvest key End.
* to harvest in menu Font > Replace the chosen symbols and to wait thus far will be replaced the selected symbols. Entire process will be reflected. The symbols, which are not in Windows type to be substituted they do not wake.
* after this is still better to harvest Font > Optimize the chosen symbols on width, in order to optimize the width of all symbols (so that not there would be large gaps), since in Windows types frequently the large gaps, which not-pretty looks on the telephone.
The selected collection of type so can be preserved into the separate file after selecting in menu Font > Save font. Then this file naturally can be loaded instead of any selected type, after harvesting Font > Load font.
After all manipulations Lang with changed type it is possible immediately to preserve and to be stitched through or to continue editing on other supplementary sheets, and then to preserve.
2. with the discovery in Lang's program from 3G model or new in the type L7e below will appear the same table with existing in Lang types. So is a description of collections in the table and the minimal'naya/maksimal'naya height of type. Only now - these are types in TTF size, but is not usual scanning; therefore the editing of separate symbols in the program is not provided. Replacement in this case consists in the fact that instead of selected type it is possible to load any type in TTF size. For this in the menu it is necessary to harvest Font > Load font and to select TTF file. Now it is possible to preserve changes and to pierce telephone by the data by Lang.
Editing of the lines
On the second supplementary sheet in the first table with the discovery of Lang there will be the list of the languages existing in Lang. After selecting any of them, will occur unpacking the lines of language (name points of the menu of telephone so forth.) and their mapping in the second table. After selecting any of them, in you eat it is possible to change its text. With the selection of another line or the pressure of key Enter will occur the retention of line, which will reflect in the list. So, in the selected language it is possible to move away iTAP, after harvesting the appropriate button.
Entire list of line can be preserved in the file. Its size is identical to size it is file programs Random's Language Editor and SHXCoDEC. Therefore it is possible to use it in them. So the preserved list it is possible to edit by the text editor (for example through Windows notebook), and to then load into the program. Moreover, it is not compulsory so that all lines in the file would be present, since program will add, only new, even if them it is more. Also, there is a function of the addition of new line.
Editing of the table of the auto- selection of the language
If we in tuning of telephone place the auto- selection of language, then telephone will select language depending on ID operator according to this table. After selecting specific ID operator - it is possible to select the language, which will be selected by telephone with the use of this operator in the falling out list. In principle this function is not very useful, but it can prove useful to someone, who frequently is situated in rouminge.
原版本地下载
[运行库下载] qtintf70.part01.rar
[运行库下载] qtintf70.part02.rar
[运行库下载] qtintf70.part02.rar
[ 本帖最后由 Linxun 于 2007-3-14 06:18 编辑 ]
|
|
